E10A-USB

Tool Stock and Availability

Introduction

E10A-USB is a low-cost on-chip emulation solution from Renesas.

Previous E10A solutions have been based on either PCI or PCMCIA and were dedicated to a particular device.
E10A-USB works differently in that one hardware can support any H-UDI or AUD capable device.

You can select which device family the E10A-USB will support at installation. This is a One Time Process (OTP). The E10A-USB can be programmed to support additional device groups with a low-cost software upgrade available from Renesas Development Tool suppliers. This means that only one hardware purchase is necessary, thus reducing the cost of developing with Renesas devices now and in the future.

E10A-USB is supplied as a handy box with debugging software and a connection cable.

Product Structure

The E10A-USB is supplied with the capability to install one Device Group, an additional purchase of one or more Device Group Addition(s) enables the same E10A-USB to support devices from other Device Groups. Please view the Installation and Device Group Additions pages for further details.
E10A-USB emulator is connected to the user system via the exclusive debug interface*1 (H-UDI*2 and AUD*3). That enables to debug in such an environment that is about equal to the actual. Using personal computer (IBM PC compatible) with USB 1.1/2.0 (Full-Speed) as a host computer, E10A-USB emulator can debug not only in laboratory but also fields and anywhere.

*1: E10A-USB emulator is not support all the microcomputers which has the exclusive debug interface (H-UDI and AUD).Please refer to the Target devices list.
*2: The H-UDI (User Debugging Interface) is an interface compatible with the Joint Test Action Group (JTAG) specifications.
*3: The AUD (Advanced User Debugger) is one of the emulator functions. The AUD has Branch trace function and RAM monitoring function. As the emulator function depends on the emulator, please refer to the emulator manual to see if the emulator has the AUD function or not.

Product Lineup

* The '11H E10A-USB does not require device group addtions, it does not support SH3 or SH4 microprocessor devices.

E10A-USB Device Group Additions (License Tool for Device Group Additions - does not apply to HS0005KCU11H)

If a user wishes to add a second, or third or subsequent Device Group to an existing E10A-USB product to enable the unit to support those groups in addition to the original selected at first installation then the user has the opportunity to purchase these Device Group Additions.

Notes:

• It is NOT necessary to purchase a device group addition if the user only wishes to support devices from one group. In this case the user should select this group as the one to install at the first installation of the E10A-USB product.
• Device group Additions can be purchased from your Renesas supplier or distributor by ordering the appropriate part number from the table below and are delivered in on CD-ROM.
• If a user has purchased a Device Group Addition or selected a Device Group at initial installation then there is no need to purchase a new Device group Addition to add new devices within the same Device group if they are released at a later date, update patches can be downloaded from the Download site or requested from your Tools Product Support team.

Part numbers of the license tools

Further notes:

• If the user possesses more than one E10A-USB to add Device Groups to, then the user should purchase an equivalent number of device Group Additions. Once purchase is valid for one E10A-USB product.
• Refer to the other pages in this section for more details on the configuration of the E10A-USB, Initial Installation and the latest information on supported devices.
• For further details please contact your Renesas supplier or distributor.